auto_x5.0
12-12-2009, 12:24 PM
A few weeks ago my driver side window wont go down without me pushing it,same thing to go up,but i was able to heard the motor running and a clicking noise so i decided to take the window motor out and surprise the bushing were worn out,so i went to the parts store and bought the bushings and got it fixed now it works like new up and down.now im goign to tell you how and what you need:
Tools needed:
*Bushing can be found at autozone,O'Reillys or Advance auto parts for about $6.99
Part No. is 74410 specs of bushings are :
Diameter:.595"
Height:.429"
*Phillips
*5/16 socket
*Flat scredriver
http://i660.photobucket.com/albums/uu322/autoxsvo/2825260110102188418S425x425Q851.jpg
Step 1: ok first thing open the door (of course)
Step 2: now see the black part that you use to shut the door that needs to come off,on the top of it stick the flat screwdriver
and pop it loose,once that is done puul it straight up, on the back of it there is the power mirror switch unplug it, then
unscrew the two screws to free the lock/unlock harness
http://i660.photobucket.com/albums/uu322/autoxsvo/2410101120102188418S425x425Q851.jpg
Step 3: Take off the two screws that are near the center of the door panel.
Step 4:Now pull the panel door up and then feed the door opening handle thru the door panel.now the door panel is off
Step 5:the window operator i s east of the door,peel back the plastic as necessary to get to it,then unplug it,now fish it thru the
little hole
http://i660.photobucket.com/albums/uu322/autoxsvo/2999199660102188418S425x425Q851.jpg
Step 6:Take the speaker off it has 4 screws
http://i660.photobucket.com/albums/uu322/autoxsvo/2798354020102188418S425x425Q851.jpg
Step 7:now peel back the plastic as necessary to get to the 3 bolts holding the motor
http://i660.photobucket.com/albums/uu322/autoxsvo/2917872640102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2939117150102188418S425x425Q851.jpg
Step 8:takes off the three bolts holding the motor,make sure you are ready to catch it or will fall inside the door (no biggie),get it
out thru the speaker hole.
Step 9: Open the motor by uncrimping the two crimps and pop the cover off surprise !!!!!!all that stuff is not garlic is whats left of
your bushing,at the end of the shaft there is a clip,spread its ears and slide the clip right off (pics no.1)
http://i660.photobucket.com/albums/uu322/autoxsvo/2867095100102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2732934250102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2050779440102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2967935220102188418S425x425Q851.jpg
Step 10: pull the gears out and clean the inside
http://i660.photobucket.com/albums/uu322/autoxsvo/2192631250102188418S425x425Q851.jpg
Step 11: Put your new bushings in
http://i660.photobucket.com/albums/uu322/autoxsvo/2825260110102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2737505900102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2622723340102188418S425x425Q851.jpg
reassemble everything and you are done
I hope this helps everyone as it helped me.
NOTE: Passenger is almost same thing
Tools needed:
*Bushing can be found at autozone,O'Reillys or Advance auto parts for about $6.99
Part No. is 74410 specs of bushings are :
Diameter:.595"
Height:.429"
*Phillips
*5/16 socket
*Flat scredriver
http://i660.photobucket.com/albums/uu322/autoxsvo/2825260110102188418S425x425Q851.jpg
Step 1: ok first thing open the door (of course)
Step 2: now see the black part that you use to shut the door that needs to come off,on the top of it stick the flat screwdriver
and pop it loose,once that is done puul it straight up, on the back of it there is the power mirror switch unplug it, then
unscrew the two screws to free the lock/unlock harness
http://i660.photobucket.com/albums/uu322/autoxsvo/2410101120102188418S425x425Q851.jpg
Step 3: Take off the two screws that are near the center of the door panel.
Step 4:Now pull the panel door up and then feed the door opening handle thru the door panel.now the door panel is off
Step 5:the window operator i s east of the door,peel back the plastic as necessary to get to it,then unplug it,now fish it thru the
little hole
http://i660.photobucket.com/albums/uu322/autoxsvo/2999199660102188418S425x425Q851.jpg
Step 6:Take the speaker off it has 4 screws
http://i660.photobucket.com/albums/uu322/autoxsvo/2798354020102188418S425x425Q851.jpg
Step 7:now peel back the plastic as necessary to get to the 3 bolts holding the motor
http://i660.photobucket.com/albums/uu322/autoxsvo/2917872640102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2939117150102188418S425x425Q851.jpg
Step 8:takes off the three bolts holding the motor,make sure you are ready to catch it or will fall inside the door (no biggie),get it
out thru the speaker hole.
Step 9: Open the motor by uncrimping the two crimps and pop the cover off surprise !!!!!!all that stuff is not garlic is whats left of
your bushing,at the end of the shaft there is a clip,spread its ears and slide the clip right off (pics no.1)
http://i660.photobucket.com/albums/uu322/autoxsvo/2867095100102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2732934250102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2050779440102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2967935220102188418S425x425Q851.jpg
Step 10: pull the gears out and clean the inside
http://i660.photobucket.com/albums/uu322/autoxsvo/2192631250102188418S425x425Q851.jpg
Step 11: Put your new bushings in
http://i660.photobucket.com/albums/uu322/autoxsvo/2825260110102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2737505900102188418S425x425Q851.jpg
http://i660.photobucket.com/albums/uu322/autoxsvo/2622723340102188418S425x425Q851.jpg
reassemble everything and you are done
I hope this helps everyone as it helped me.
NOTE: Passenger is almost same thing