vortech,paxton or procharger?

[nitrobullitt]

which is the best california smog-legal, least problems centrifugal blower for the money? I have a 01 bullitt really wanted a kenne bell but i want to keep the bullitt intake manifold what do u guys think?

[HandzCarIsDirty]

vortech

[Powershift03]

vortech

+1

I agree

[900hpBLURRRR]

i would say procharger...but i'm partial lol....plus mine isnt smog legal. I'd go vortech to be smog legal

[Powershift03]

Yea, SMOG legal is one of the reasons I said Vortech too. These days, that is a big plus. I have also had several Vortech cars, and they make a great supercharger.

[900hpBLURRRR]

i LOVE my procharger...but yea you asked for SMOG legal

[02gt]

i have a vortech, and the new v-3 si trim is hella nice, this months mm and ff they tested it and they were making 18-19 lbs of boost....they're a very good blower and well worth the expense

[nitrobullitt]

sounds like vortech is the way to go

[02gt]

i would say even the paxton is good but they are more expensive, procharger ehh, they have a good set up ratio so you'll boost up quicker but you cant really take them as far when it comes to max rpm...

[MrMadMunky]

but doesnt procharger put out more HP then the Vortech

[superfly s197]

but doesnt procharger put out more HP then the Vortech

From what I heard.



IMO, go with Vortech/Paxton. Its the same company only difference is one is A/A IC and the other is A/W IC. That's your best bang for the buck.

[900hpBLURRRR]

yeah but most procharger kits arent "smog" legal dude...but I would go with vortech for a best bang for the buck smog legal setup

[MrMadMunky]

Gotcha "smog legal"

[foxforce1]

If it wasn't for the smog issue, it'd be procharger all the way. It's proven itself countless times at the track.

[900hpBLURRRR]

here in cali the emissions SUCK...mine is NOWHERE NEAR smog legal...but thats why it helps knowing the right people:biggrin:

[MrMadMunky]

yes the right people in the right business keeps our cars running

[900hpBLURRRR]

100% true...nothing beats a "$200" smog lol

[MrMadMunky]

dam sorry to be you it only cost me 50 bucks LOL

[900hpBLURRRR]

your state is also WAY MORE SMOG FRIENDLY lol

[MrMadMunky]

LOL when i lived in CALI still wasnt a problem. LOL HAD VEGAS PLATES LMAO

[900hpBLURRRR]

give me ur plates then lol

[MrMadMunky]

i have the old ones for my Ranger that was Totaled LMAO

[900hpBLURRRR]

too bad i cant register my car in AZ lol....you should get a procharger john

[MrMadMunky]

i am planning on it. Just need to put some forged internals first cause i want 15 - 20 pounds

[900hpBLURRRR]

fast little sixer lol

[MrMadMunky]

yep planning on 480 HP

[MrMadMunky]

if not then MORE :D

[900hpBLURRRR]

nice....would be a sleeper like no other

[MrMadMunky]

thats what i am plannin on :)

[900hpBLURRRR]

well a procharger wont let yo be a sleeper like a roots blower....centris whine at idle LOUD

[MrMadMunky]

yeah i noticed that. My buddy has a procharger on his 03 sixer and you can here that bastard down the block. But its almost a whistle

[900hpBLURRRR]

it is....a LOUD whistle..but depends on whether you go,P series,D series cause F series you wont need

[MrMadMunky]

he has a P1 i believe he runs 11.5 at 15lbs in the 1/4 not bad for a sixer. He is plannin on going 4.3 stroker with forged and all the bells and whistles and think he is shooting for 600 rwhp with 20lbs on the P

[900hpBLURRRR]

thats comin up on maxin out he P blower

[MrMadMunky]

yeah i think he is trying to see what he can get out of it before it takes a :crap:

[900hpBLURRRR]

understandable lol

[MrMadMunky]

i dont want to be in the car when it takes that :crap:

[900hpBLURRRR]

lol...he'll just snap a belt lol

[MrMadMunky]

i was in the car when that happened and i had to unravel it up because he didnt want to get DIRTY

[900hpBLURRRR]

haha

[superfly s197]

i am planning on it. Just need to put some forged internals first cause i want 15 - 20 pounds

What type of F/I?

Powerhouse turbo right??? :D

[foxforce1]

procharger came out with a helical cut gear that makes it much quieter than the older straight cut gear blowers.

[HandzCarIsDirty]

yeah i noticed that. My buddy has a procharger on his 03 sixer and you can here that bastard down the block. But its almost a whistle


my old procharger p600b sounded like a jet airplane

[superfly s197]

my old procharger p600b sounded like a jet airplane

in other words, it sounded badass :D

[MrMadMunky]

lol YEAH THAT IS TRUE

[HandzCarIsDirty]

yep, it sure did! lol

Kinda miss it now

[jeed]

P R O C H A R G E R !!!

get the P1SC and then when you want more power, upgrade the impellers / bearings & you've still got a CA CARB LEGAL supercharger cause your unit say its a P1SC.

thats what alotta people do.

i dgaf and just straight up d1sc. but what can i say... it was sponsored.

[Jose]

Nitrobullitt

Have you decided what blower to get ? :batman:

[fastferndog]

Nitrobullitt

Have you decided what blower to get ? :batman:

+1

by the way procharger does make a SMOG LEGAL BLOWER.

Just order w/ the upgrades

[Jose]

+1

by the way procharger does make a SMOG LEGAL BLOWER.

Just order w/ the upgrades



Keep us posted OP

[cmher18]

Im procharger out performed votech I had the D1 making 13 psi running a 4v cobra with a vortect with 15psi and still beat him...

Im a procharger fan. I spin it to 6700-7000

[Pharoe]

Alaska = No Smog bhahahahaha :)

[foxforce1]

procharger all the way. CARB? Isn't that something that makes you fat?

[fstqbn]

Procharger!

[Pharoe]

I see Paxton just got Nooooooooooooooooo love in here lmao

[Powershift03]

Alaska = No Smog bhahahahaha :)

California = Never snow bound bhahahahaha :)


LOL

[Pharoe]

California = Never snow bound bhahahahaha :)


LOL

:hello: LMAO what about North Cali?

So with these Centris there isn't instant boost so what RPM ranges will you see/feel the difference?