2004 Mustang GT dyno #'s [Archive]

Brandon

11-13-2009, 02:23 AM

http://farm3.static.flickr.com/2503/3824550778_ab4af54296_b.jpg

http://www.youtube.com/watch?v=2cwrQL_gNOU

K&N FIPK, Accufab 75mm TB & Trickflow plenum, Bassani SS catted X, Borla Stingers, 31 spline T-Lok w/Moser axles, FRPP 4.10's, Hurst billet/plus, MM XD LCA's, MM XL FLSFC, Cobra brakes, Sniper tuned.

Jose

11-13-2009, 06:52 PM

Not bad..Lets see some pics of your ride

03CENTGT

11-13-2009, 07:19 PM

Nice! Too bad it lost to a stang with 10 less hp and 4 less lbs of tq. and no gear...lol..Post the 2 videos!!!

CobraCurt

11-13-2009, 07:31 PM

nice

Brandon

11-13-2009, 08:16 PM

Nice! Too bad it lost to a stang with 10 less hp and 4 less lbs of tq. and no gear...lol..Post the 2 videos!!!

By the way you were at 3000rpm's in 1st gear at 20mph...

Watch your other youtube vid where your bro films your speedo, you gunned it right after 20mph and you can see you were at 3k

And I don't have the 2nd video

10less hp/4 less tq....thats before the Sniper tune... you probably have more than me now

Nicksbluestang

11-13-2009, 08:20 PM

LOL at the 2v's going at it. Both of you would lose to me.

02gt

11-13-2009, 08:23 PM

not me.....:)

Nicksbluestang

11-13-2009, 08:35 PM

You are not N/A so you you dont count. LOL

02gt

11-13-2009, 08:41 PM

believe it or not his numbers are good enough to go 12's, theres a couple of guys on modded mustangs.com running identical numbers, but got be able to drive your *** off to acheive that....

MR.KNOCKOUT

11-13-2009, 08:51 PM

By the way you were at 3000rpm's in 1st gear at 20mph...

Watch your other youtube vid where your bro films your speedo, you gunned it right after 20mph and you can see you were at 3k

And I don't have the 2nd video

10less hp/4 less tq....thats before the Sniper tune... you probably have more than me now

brandon you got those 410s
george had more weight in the car with me in there..lol.....
and no gear........
cant wait to see what he'll run with gears.......
and he wasnt at 3k rpms.......

Nicksbluestang

11-13-2009, 08:52 PM

With a good driver, gearing and a nice sticky tire its possible.

But at the same time, a stock 3v is good for 12's too. Just ask Adam.

MR.KNOCKOUT

11-13-2009, 08:57 PM

With a good driver, gearing and a nice sticky tire its possible.

But at the same time, a stock 3v is good for 12's too. Just ask Adam.

well i can say my bro is good driver.
he has sticky tires.
mickey thompsons and 555rs
yeah..he's beaten bolt on 3v's
with his 2v and sn95 5.0

Nicksbluestang

11-13-2009, 09:05 PM

who is your bro?

Brandon

11-13-2009, 09:06 PM

brandon you got those 410s
george had more weight in the car with me in there..lol.....
and no gear........
cant wait to see what he'll run with gears.......
and he wasnt at 3k rpms.......

I"m guessing this is Nick lol

Dude watch the video:

http://www.youtube.com/watch?v=tcbGRA7euAo

From about 6 seconds onwards, you can clearly see 20mph in 1st gear = 3000rpm's...

Furthermore, check out this useful chart which has proven to be pretty accurate for everyone within 1-2mph:

http://paladinmicro.com/PalMFrame00.htm?wks=spd

Enter the appropriate values and it also clearly shows 20mph in 1st gear is 3000rpm's with 3.27's. That chart is not reverse engineering so it's definitely accurate

Anyhow....i'm interested in a rematch and maybe a roll from 5mph...I just want to see the difference in the 4.10's from a really low speed

Brandon

MR.KNOCKOUT

11-13-2009, 09:07 PM

who is your bro?

03CENTGT
the guy with the other 2v

MR.KNOCKOUT

11-13-2009, 09:08 PM

I"m guessing this is Nick lol

Dude watch the video:

http://www.youtube.com/watch?v=tcbGRA7euAo

From about 6 seconds onwards, you can clearly see 20mph in 1st gear = 3000rpm's...

Furthermore, check out this useful chart which has proven to be pretty accurate for everyone within 1-2mph:

http://paladinmicro.com/PalMFrame00.htm?wks=spd

Enter the appropriate values and it also clearly shows 20mph in 1st gear is 3000rpm's with 3.27's. That chart is not reverse engineering so it's definitely accurate

Anyhow....i'm interested in a rematch and maybe a roll from 5mph...I just want to see the difference in the 4.10's from a really low speed

Brandon

ofcourse its nick...lol....
dude no roll.
do it from a dig. lol...
lets see that driver mod.:rockon:

Nicksbluestang

11-13-2009, 09:14 PM

I"m guessing this is Nick lol

Dude watch the video:

http://www.youtube.com/watch?v=tcbGRA7euAo

From about 6 seconds onwards, you can clearly see 20mph in 1st gear = 3000rpm's...

Furthermore, check out this useful chart which has proven to be pretty accurate for everyone within 1-2mph:

http://paladinmicro.com/PalMFrame00.htm?wks=spd

Enter the appropriate values and it also clearly shows 20mph in 1st gear is 3000rpm's with 3.27's. That chart is not reverse engineering so it's definitely accurate

Anyhow....i'm interested in a rematch and maybe a roll from 5mph...I just want to see the difference in the 4.10's from a really low speed

Brandon
I just saw the video and brandon is quite right.
03CENTGT
the guy with the other 2v
tell your brother i want a heads up against him.
ofcourse its nick...lol....
dude no roll.
do it from a dig. lol...
lets see that driver mod.:rockon:
roll or dig, i'm down to go.

Brandon

11-13-2009, 09:15 PM

Nickbluestang I was refering to Nick as in Mr. Knockout

Nicksbluestang

11-13-2009, 09:16 PM

I figured that out hence the ninja edit.

but just so we can clarify something...i am teh real nick.

MR.KNOCKOUT

11-13-2009, 09:17 PM

I just saw the video and brandon is quite right.

tell your brother i want a heads up against him.

roll or dig, i'm down to go.

ok cool he'll be on here sooner or later......
but hes down to run anyone......
roll or dig doesnt matter.
plus hes always at irwindale......:thumbsup:

MR.KNOCKOUT

11-13-2009, 09:19 PM

Nickbluestang I was refering to Nick as in Mr. Knockout

lol whats up brandon?
still screaming? lol:D

MR.KNOCKOUT

11-13-2009, 09:20 PM

I figured that out hence the ninja edit.

but just so we can clarify something...i am teh real nick.

real nick? wow.........

jake01cobra

11-13-2009, 09:31 PM

can't wait to see this run at the track!! :D

MR.KNOCKOUT

11-13-2009, 09:34 PM

can't wait to see this run at the track!! :D

george and brandon? lol
cant wait either..lol..

brandon are you running on the et streets?

jake01cobra

11-13-2009, 11:23 PM

george and brandon? lol
cant wait either..lol..

brandon are you running on the et streets?

yeppp :D :auto::auto:

Brandon

11-13-2009, 11:55 PM

george and brandon? lol
cant wait either..lol..

brandon are you running on the et streets?

Not for a long time...the question is when are YOU, NICK going to have YOUR car ready so you won't have to speak for someone else? ahahahahahaha

Brandon

11-14-2009, 12:03 AM

Nice! Too bad it lost to a stang with 10 less hp and 4 less lbs of tq. and no gear...lol..Post the 2 videos!!!

And by the way......How was it that I lost? lol...we were even

The1WhiteDevil

11-14-2009, 03:30 AM

nice numbers bro. i put the about the same down through an auto. :D we should race sometime... ;)

MrMadMunky

11-14-2009, 09:32 AM

brandon starting shet already? lol what else iin new

03CENTGT

11-14-2009, 01:10 PM

LOL at the 2v's going at it. Both of you would lose to me.

When would you like to be proven wrong bro? :D

Brandon YOU HAVE 4.10s!!!!!!!!! I'm on stock gear!! LoL...But you're right the Sniper tune did help...thankyou son! LoL Can't wait to get my 4.10s :party:

The1WhiteDevil

11-14-2009, 01:41 PM

i wanna race. 3.90's/ dr's ftw!

MR.KNOCKOUT

11-14-2009, 08:17 PM

And by the way......How was it that I lost? lol...we were even

lmao.......im gonna speak for myself brandon.
i know what up with foxbodys
i dont listen to the b/s people tell me.
i know what to do to fox to make it run right.
ill have it ready for you. :biggrin:

i'll show you later what im putting so that you could know
what your in for. :cool2:

MR.KNOCKOUT

11-14-2009, 08:18 PM

yeppp :D :auto::auto:

brandon is going to need them against george....
:thumbsup:

BrianGT

11-16-2009, 01:05 AM

i got all u 2 valves handled lol

900hpBLURRRR

11-16-2009, 01:17 AM

i wanna play lol

03CENTGT

11-16-2009, 08:30 AM

i got all u 2 valves handled lol

:rofl:

:nono: Me and Modul3r can hand some 3V's there asses...lol..stock or somewhat with boltons but a full bolt on 3V will beat me, I lost to one at Fontana.But trust me these 2V's can whoop some 3 and 4V asses lol

900hpBLURRRR

11-16-2009, 01:43 PM

13.6 @ fontana is pretty good for a 2v.....on street tires?

BrianGT

11-16-2009, 03:16 PM

:rofl:

:nono: Me and Modul3r can hand some 3V's there asses...lol..stock or somewhat with boltons but a full bolt on 3V will beat me, I lost to one at Fontana.But trust me these 2V's can whoop some 3 and 4V asses lol

oh yea i respect 2v's just sayin with a tune and intake i was runnin 13.4s in my auto... but now its a little closer to 10's

and that is a good run for a 2v on street tires :cheers:

900hpBLURRRR

11-16-2009, 03:17 PM

yea lets not forget the juice's factor in that 10's pass lol

03CENTGT

11-17-2009, 08:55 AM

LoL yeah thanks, My 60ft was a 2.10 so I know the lil 2V can pull closer to low 13s with a good launch and the right tire set up.

Here's a video at Fontana me racing a 3V putting down 300rwhp with E/T street slicks in the rear.

http://www.youtube.com/watch?v=ubjhJVDPhcw

Sleeper GT

03-30-2010, 07:02 PM

It seems like there is plenty of NA 2v's for me to run with. Hopefully some of us can run them SOON as i seem to b the only pre new edge stange, but i got those numbers!

Jose

03-30-2010, 07:48 PM

It seems like there is plenty of NA 2v's for me to run with. Hopefully some of us can run them SOON as i seem to b the only pre new edge stange, but i got those numbers!

May 6th

Bring her out for some runs :party0007:

03CENTGT

03-31-2010, 04:51 PM

It seems like there is plenty of NA 2v's for me to run with. Hopefully some of us can run them SOON as i seem to b the only pre new edge stange, but i got those numbers!

There's actually another SN95 haven't seen him post lately...He's got some pretty cool bolt ons as well...We actually raced already...New Edge FTW!:signdaddy[1]:

Sleeper GT

03-31-2010, 05:00 PM

Once i get my car back to running right I would love to get her out. Iam dying to c what she can do. The car has been running good since all the work was done, and she hasent even been tuned!!

03CENTGT

03-31-2010, 05:02 PM

Get her tuned before you bring her out!!

Sleeper GT

03-31-2010, 05:10 PM

when i had her dyno'ed the air/fuel was fine all the way through, so i didnt feel rushed to tune her espeacially when she ran even with a lightning twice. But now iam guna b around all u guys so i gotta come with everything i got!!

03CENTGT

04-01-2010, 12:38 PM